Tag: Analytical models
A Novel Current-Mode Instrumentation Amplifier Based on Operational Floating Current Conveyor,
This paper presents a novel current-mode instrumentation amplifier (CMIA) that utilizes an operational floating current conveyor (OFCC) as a basic building block. The OFCC, as a current-mode device, shows flexible properties with respect to other current- or voltage-mode circuits. The advantages of the proposed CMIA are threefold. First, it offers a higher differential gain and a bandwidth that is independent of gain, unlike a traditional voltage-mode instrumentation amplifier. Second, it maintains a high common-mode rejection ratio (CMRR) without requiring matched resistors, and finally, the proposed CMIA circuit offers a significant improvement in accuracy compared to other current-mode instrumentation amplifiers based on the current conveyor. The proposed CMIA has been analyzed, simulated, and experimentally tested. The experimental results verify that the proposed CMIA outperforms existing CMIAs in terms of the number of basic building blocks used, differential gain, and CMRR.
Instrumentation and Measurement, IEEE Transactions on (Volume:54 , Issue: 5 )
Yehya H. Ghallab, and Wael Badawy, Karan V.I.S. Kaler and Brent J. Maundy, “A Novel Current-Mode Instrumentation Amplifier Based on Operational Floating Current Conveyor,” IEEE Transaction on Instrumentation and Measurement, Volume 4, October 2005, pp. 1941 – 1949.
A New Topology for a Current-mode Wheatstone Bridge
This paper presents a new topology for a current-mode Wheatstone bridge (CMWB) that uses an operational floating current conveyor (OFCC) as a basic building block. The proposed CMWB has been analyzed, simulated, implemented, and experimentally tested. The experimental results verify that the proposed CMWB outperforms existing CMWBs in terms of accuracy. A new CMWB linearization technique based on OFCC has been proposed, used, analyzed, and tested. The advantages of the proposed CMWB are fourfold. Firstly, it reduces the number of sensing passive elements; i.e., we can use two resistors instead of four and get the same performance as the traditional voltage-mode implementation. Secondly, we can apply the superposition principle without adding signal conditioning circuitry; therefore, the addition of sensor effects is possible. Thirdly, it has a higher common-mode cancellation. Finally, the proposed CMWB topology offers a significant improvement in accuracy compared to other CMWBs
Yehya H. Ghallab, and Wael Badawy ” A New Topology for a Current-mode Wheatstone Bridge” IEEE Transaction on Circuit and System II, Volume 53, No.1, pp. 18-22, January 2006.
Link to the list of other Peer Journal Publications